Fuel Injectors

Share:

Fuel Injectors for BMW M coupe

The following information was collected from different digest postings on the web regarding fuel injectors. This is a very common upgrade on the 95 M3 w/ OBDI with the addition of a Euro HFM and matching chip. It's also very much needed when one turbos or super charges a motor.

It has been reported that '95 M3 w/OBDI have 17lb/hr injectors and '96+ M3 w/OBDII have 21.5lb/hr injectors.

Typical upgrades are the Ford 19lb/hr units (actually 21.7lb/hr when used on a BMW), or Ford 24lb/hr injectors (about 27.7lb/hr on a BMW).

Ford injectors are made by Bosch. They are sold under the Ford Performance Products brand. The 30lb/hr units have red tops. The 24lb/hr units have light blue tops. The 19lb/hr have yellow tops. The 19's were stock on the 86-95 Mustang 5.0 (non-Cobra). The 24's were stock on the '93-'95 Mustang Cobra.

M coupe Fuel Injectors

Below is a photo of an injector from a M coupe. Note the color, Rose or some may call it Pink? They flow 205cc/min or 19.5lb/hr.

Fuel injector
Fuel injector

Injector Part Numbers

The following table list the Bosch injector part numbers and their corresponding BMW and /or Ford part numbers.

Bosch 0 280 150 415 190cc/min @ 350kPa
BMW 13 64 1 730 060 Light green color



Bosch 0 280 150 440 205cc/min @ 350kPa
BMW
Light Rose



Bosch 0 280 150 913/947 255.9cc/min @ 270kPa
Ford F1TE 9F593 C1A (Light) blue color
Ford F1TE 9F593 D5A



Bosch 0 280 150 911/945 315.3cc/min @ 270kPa
Ford F1SE 9F593 D1A Fire (orange) red color
Ford FISE 9F593 E5A (Note, the "I" in FISE, is I think a "1")



Bosch 0 280 150 967 386.8cc/min @ 270kPA
Ford F4SE 9F593 B1A Sapphire (dark) blue color

Injector Data

Injector #/hr rated #/hr @ 350kPa Approx HP (95 M3)
Stock (95 M3) 17.16 17.16 270
Light Blue 23.11 26.31 330
Fire Red 28.48 32.43 410
Sapphire Blue 34.93 39.77 500

Pressure Data

kPa = kilo Pascals
100 kPa = 1 bar = 14.5 psi
270 kPa = 2.7 bar = 39.15 psi
350 kPa = 3.5 bar = 50.75 psi


SG Applications

SG Motorsports